Automation & Control Solutions

MATelec Australia Pump Controllers for Smarter Water Systems

MATelec Australia pump controllers give water, wastewater and building-service systems the control, protection and operating visibility needed to run with less manual intervention. This Pumptastic collection brings together HydroWHIZ submersible level controllers and liquid level alarm panels for projects across Perth, regional Western Australia and the rest of the country. The range supports practical applications such as sewage and stormwater pump-out, tank filling and emptying, water transfer, pressure boosting, hot-water circulation and chiller supply. Instead of treating the controller as an afterthought, match it to the electrical supply, number of pumps, motor current, starting method, control signal and duty strategy. A correctly selected panel can alternate duty, stage or destage pumps, record run hours and faults, provide alarm history and protect valuable pumping equipment. HydroWHIZ models add a colour touchscreen HMI, configurable level, pressure or temperature modes, trend information, diagnostic pages and manual or automatic control. Buyers can start with the complete MATelec Australia range, compare related pump controllers in Australia, or go directly to a matched HydroWHIZ configuration. For a straightforward installation, view the single-phase one-pump HydroWHIZ controller. For duty and standby operation, compare the three-phase two-pump HydroWHIZ controller. If the system is business-critical or the specification is still changing, send Pumptastic the pump nameplate data, supply phase, full-load current, number of pumps, sensor type and required operating sequence before ordering. That short technical check is cheaper than discovering on site that the panel, overload range or input arrangement does not match the job.

Choose the Right HydroWHIZ Configuration

Begin with the supply and load, not the screen size or cabinet appearance. MATelec Australia offers HydroWHIZ configurations for single-phase and three-phase systems, with one, two, three or four pumps represented in this collection. A one-pump panel suits a simple automatic duty where redundancy is not required. A two-pump arrangement can support duty and standby or duty and assist operation, depending on the application and configuration. Three-pump and four-pump systems give designers more scope for staged capacity, alternation, standby coverage and pump limiting. For larger three-phase motors or sites where reducing mechanical and electrical stress at start-up matters, compare the two-pump soft-starter HydroWHIZ controller and the three-pump soft-starter HydroWHIZ controller. Standard direct-on-line variants are available across multiple overload ranges, so the selected variant must match the motor current rather than the pump's kilowatt rating alone. Control inputs also matter. HydroWHIZ can work with analogue 4-20mA feedback and digital level devices, allowing the panel to respond to level, pressure or temperature conditions according to the configured system mode. Consider the required high-level, low-level, duty start, duty stop and standby start points, plus common-fault outputs, building management system requirements and remote alarm expectations. In WA, long travel distances and harsh operating environments make fault visibility and preventive maintenance information especially valuable. Logged events, time-stamped alarms, pump starts, run hours and trend data help technicians diagnose recurring conditions before another site visit. Pair controllers with suitable level control components, pressure transducers and pumps selected for the actual fluid, head, flow and solids duty. Final design and installation should be confirmed by a qualified pump professional and a licensed electrician.

Level Alarms and Pump Protection That Make Faults Visible

Not every site needs a multi-pump touchscreen panel. Some systems need a clear warning when a tank, sump or storage vessel reaches an abnormal level. The MATelec Basic High Level Alarm FPC-12650 provides an audible warning in an IP54 polycarbonate enclosure and accepts a low-voltage switched input or conductivity probe signals. The panel includes status indication, alarm mute, reset and test controls, plus a volt-free common-fault output that can be used for BMS signalling where the design permits. The MATelec Standard Set-Point Alarm Plus FPC-12651 adds visual strobe indication to make an active condition easier to notice in plant rooms and operational areas. These alarm panels can support water storage, tank level monitoring, dry-run warning and pump protection strategies when matched to the right sensing device and control logic. MATelec Australia level alarms are not substitutes for correct hydraulic design or regular maintenance, but they provide a direct signal when the system moves outside its intended condition. For sewage and stormwater duties, browse compatible sewage pumps, wastewater pumps and commercial wastewater equipment. For transfer applications, compare the water transfer range. Specify whether the alarm is for high level, low level or both, how it will be acknowledged, whether a local strobe is required, and whether a remote BMS signal must be provided. Also confirm the enclosure location, cable route, sensor compatibility and power supply. Those details determine whether the alarm becomes a useful operating safeguard or an ignored box on the wall.

Buy MATelec Pump Controls Online with WA Selection Support

Pumptastic makes it easier to move from a project requirement to a specific controller instead of searching through an undifferentiated catalogue. The collection includes clear model references, phase and pump-count options, overload variants and online pricing for standard MATelec Australia configurations. That matters for contractors preparing quotes, facility teams replacing an existing panel, agricultural operators improving water transfer reliability and consultants checking budget allowances. Use the product pages to shortlist the required configuration, then request a quote when the job needs multiple units, optional additions or confirmation against a control philosophy. Pumptastic supplies customers in Perth and throughout Western Australia, including regional projects where correct selection before dispatch reduces costly delays. Australia-wide buyers can review delivery and shipping information before ordering. The best purchasing decision is not automatically the panel with the largest pump count or the most features. It is the controller that matches the supply, motors, sensors, process sequence, alarm response, enclosure conditions and maintenance capability of the site. MATelec Australia brings Australian engineering experience to pump and motor control, while Pumptastic provides a direct online route to available HydroWHIZ controllers and set-point alarms. If you already know the part number, select the matching product and overload range. If you are replacing a panel or building a new system, contact Pumptastic with the electrical and hydraulic duty before purchase. A concise specification review can prevent a wrong variant, missed input, unsuitable starter or incomplete alarm arrangement. Shop the collection now, or ask for a technical check and quote for your WA water, wastewater, or building services project.

Frequently Asked Questions

What products are in this MATelec Australia collection?

The collection focuses on HydroWHIZ submersible level controllers for one to four pumps, including selected three-phase soft-starter configurations, plus FPC-12650 and FPC-12651 set-point level alarm panels. The available range may change, so use the product grid for current variants, pricing and availability.

What is a HydroWHIZ pump controller used for?

HydroWHIZ is used to automate and protect pumping systems operating from level, pressure or temperature conditions. Typical duties include sewage and stormwater pump-out, tank filling or emptying, water transfer, pressure boosting, hot-water circulation and chiller supply. The exact functions depend on the selected model and configuration.

How do I choose between single-phase and three-phase control?

Match the controller to the site's electrical supply and the connected pump motors. Confirm voltage, phase, full-load current and motor protection requirements from the nameplate and project documents. Do not assume the phase from the application alone. A licensed electrician should verify the final electrical selection.

How many pumps should the controller operate?

Choose the pump count from the hydraulic duty and redundancy plan. One pump suits simple duties. Two pumps may provide duty and standby or duty and assist operation. Three or four pumps can support staged capacity and additional standby coverage. Confirm the intended control sequence before ordering.

When should I consider a soft-starter controller?

A soft starter may be appropriate when a three-phase motor needs a controlled start to reduce inrush current and mechanical shock. Suitability depends on motor size, supply constraints, switching frequency and project requirements. Compare Pumptastic's listed soft-starter variants and request a technical check before purchase.

Can HydroWHIZ work with a 4-20mA level transducer?

HydroWHIZ submersible level controllers can support analogue 4-20mA feedback for level, pressure or temperature control, alongside configurable digital inputs. Confirm the transducer range, signal scaling, cable arrangement and required float-switch backup with the controller specification and commissioning plan.

What is the difference between FPC-12650 and FPC-12651?

The FPC-12650 is a standard set-point alarm with an audible buzzer and status controls. The FPC-12651 Set-Point Alarm Plus adds visual strobe indication and flexible input options. Confirm the exact variant, included accessories and required sensor before ordering either panel.

Are these controllers suitable for sewage and stormwater systems?

Selected HydroWHIZ controllers are designed for submersible pumping applications including sewage and stormwater pump-out. Controller suitability does not confirm pump suitability. Check the fluid, solids passage, flow, head, number of pumps, sensor arrangement, enclosure location and required alarm sequence as one complete system.

Does Pumptastic supply MATelec products outside Perth?

Yes. Pumptastic serves Perth, regional Western Australia and customers across Australia. Delivery options depend on the product, address and order size. Review the shipping information or request a quote for high-value controllers, multiple units or regional project delivery before placing the order.

What information should I send for a controller check?

Send the pump model or motor nameplate, supply voltage and phase, full-load current, number of pumps, starting method, level or pressure sensor details, operating sequence, alarm outputs, BMS requirements and enclosure conditions. Clear input data allows a faster and more reliable product recommendation.