Pumps On Sale!
Fast Dispatch
The Grundfos PM START is a pump pressure manager designed for automatic start and stop control of water supply pumps. It features a brass valve bo...
View full detailsThe Grundfos PM START is a pump pressure manager designed for automatic start and stop control of water supply pumps. It features a brass valve bo...
View full detailsGrundfos PM PLUS is a pressure manager designed for automatic start/stop control of Grundfos or other pumps for water supply in domestic applicati...
View full detailsA Grundfos Pressure Manager starts your water pump when the pressure drops and stops it when the water stops flowing. It also shuts the pump off if the water runs out, which protects it from running dry. Pumptastic sells the Grundfos PM START and PM PLUS online, with GST included and free shipping on orders over $100.
Ready to order? Pick a model below and add it to your cart. Not sure which one fits your pump? Call (08) 6384 5884, Monday to Friday, 9am to 5pm, or contact our team and we will help you choose.
It is a small all-in-one controller that connects to your pump and feeds your pipes. It combines pressure control, a non-return valve and dry-running protection in one unit. Both models on this page also list an IP65 enclosure.
Grundfos says its pressure managers suit homes with more than two storeys, systems with many outlets, private wells, garden watering, rainwater tanks and areas where mains pressure rises and falls. In plain terms, they help when taps run weak or the pump runs when it should not.
There are two models on this page. Each controls one pump, and both have 1 inch G connections. The main difference is the start pressure, which is fixed on one and adjustable on the other.
At a glance, the PM START is a fixed setting unit with a 10 bar limit and a 220 to 240V supply. The PM PLUS is adjustable, has a 12 bar limit and takes 110 to 240V. Check the kW limit on each product page, because a larger pump needs a different control solution. If your pump is bigger than that, call us and we will point you to a better fit.
The PM START has a fixed start pressure and a brass valve body. We list a 1.5 bar PM START and a 2.2 bar PM START. Both suit pumps up to 1.5 kW on single phase 220 to 240V power, with a maximum operating pressure of 10 bar.
The Grundfos PM PLUS lets you set the start pressure to suit your system. It can be installed with or without a pressure tank, and it resets itself after a power outage. It handles up to 1500 W, runs on 110 to 240V and has a 12 bar maximum operating pressure. It comes without a plug.
Many buyers still search for the older PM1 and PM2 names. Other Australian retailers list the PM START and PM PLUS as the newer models in that line. Send us a photo of your old unit and we will check the match before you order, because sizes and connections can differ.
Match the controller to the pump first, then to the price. A cheap controller that does not suit the pump costs more in the end, because you buy twice. Read these details off your pump nameplate before you order:
If you want a simple, fixed setting, the PM START is the lower cost choice. If your system needs fine tuning, or you plan to run with or without a tank, the PM PLUS gives you the control. Get a licensed electrician to wire it in if you are not qualified.
A pressure manager is one part of the system. Weak pressure can also come from a worn pump or a waterlogged tank, so look at all three. Browse our Grundfos pressure boosting pumps, our pressure tanks and the wider pump controllers range.
If your pump keeps starting and stopping, read our pump pressure tank guide before you buy. Not sure what flow and head you need? Our pump sizing guide walks through it.
Trade buyers can order online or ring for help. Grundfos describes installation as simple: connect the unit to the pump and the power supply, then set the pressure. On a busy site, that saves a call out. Buying several controllers for a project? Call (08) 6384 5884 and ask about pricing on larger orders. Heavy or oversized freight may cost extra, which we confirm before dispatch.
Here is a tip you can pass on to your team. Photograph the nameplate of every pump on site and keep the photos in one folder, with the kW and voltage written beside each. When a controller fails on a remote site, you can order the exact match in one call instead of driving back to check.
Standardise on one model across your sites where you can, so one spare fits many pumps. Freight to a remote site takes longer than a trip to the shed, so order the spare with the pump.
For quotes, email the models and quantities to hello@pumptastic.com.au. We reply to emails within one business day, and calling is faster for urgent jobs.
We ship Australia wide with Australia Post, Toll and other couriers. Standard shipping is free over $100, and orders under $100 pay a flat $20 including GST. Allow around 5 to 7 business days to most places. Remote and rural areas, such as the Pilbara, Goldfields and Kimberley, can take a little longer.
Need it faster? Express delivery is available by quote, so call with your postcode and the item. We send tracking once your order ships. Read the full delivery and shipping terms.
If you want to buy Grundfos Pressure Manager units from an Australian shop, start on this page. Our Grundfos Pressure Manager shop online is open at any hour, with GST included in every price and free shipping over $100. Our team can check the fit by phone or email before you pay.
New pumps and controllers carry the manufacturer's warranty, and the length depends on the brand and model. Your rights under the Australian Consumer Law still apply. Checkout accepts Visa, Mastercard, American Express, UnionPay and Shop Pay.
We would rather size the controller with you than process a return, because returns cost you shipping and a restocking fee.
It is a controller that starts and stops a water pump based on pressure and flow. It also protects the pump if the water runs out.
It starts the pump when pressure falls to the start setting and keeps it running while water flows. When flow stops, it switches the pump off.
Choose the PM START for a fixed start pressure of 1.5 or 2.2 bar. Choose the PM PLUS if you want to adjust the start pressure for your system.
Yes. Add a PM START or PM PLUS to your cart on this page. Prices are in Australian dollars and include GST.
Often yes, if the kW, voltage and connection size are within the limits. The PM PLUS is described as suited to Grundfos or other pumps, so send us your nameplate photo and we will confirm.
The PM PLUS can be installed with or without a tank. For the PM START, check the product page or call us before you decide.
Standard shipping is free over $100, and orders under $100 pay a flat $20 including GST. Allow around 5 to 7 business days to most places. Express is available by quote.
Yes. Prices are in Australian dollars and include GST.
New products carry the manufacturer's warranty. Email us first to return one. Items must be new, unused and in original packaging, return shipping is on you, and approved refunds carry a 20 percent restocking fee.
Yes. Call (08) 6384 5884, Monday to Friday, 9am to 5pm, with the models and quantities, and we will quote the order.
Ready to buy? Add a Grundfos Pressure Manager to your cart, or call (08) 6384 5884 and we will check the fit before you pay.
$100.00 away from free shipping!