Pumps On Sale!
Fast Dispatch
The Grundfos GT-H-18 PN10 G1 V is a compact steel pressure tank designed for drinking water applications. It features a non-toxic butyl rubber d...
View full detailsVertical or horizontal pressure tanks suitable for potable-water applications with high quality liner and diaphragm. Features Product Number: 97550...
View full detailsThe Grundfos GT-H-80 PN10 G1 V is a steel pressure tank designed for drinking water applications, featuring a non-toxic butyl rubber diaphragm and...
View full detailsThe Grundfos GT-H-60 PN10 G1 V is a steel pressure tank designed for drinking water applications, featuring a non-toxic butyl rubber diaphragm and...
View full detailsThe Grundfos GT-H-100 PN10 G1 V is a steel pressure tank designed for drinking water applications, featuring a non-toxic butyl rubber diaphragm an...
View full detailsThe Grundfos GT-H-35 PN10 G1 V is a compact steel pressure tank designed for drinking water applications. It features a non-toxic butyl rubber d...
View full detailsThe Grundfos GT-H-8 PN10 G1 V is a compact steel pressure tank designed for drinking water applications. It features a non-toxic butyl rubber di...
View full detailsThe Grundfos GT-H-18 PN16 G1 V is a compact steel pressure tank designed for drinking water applications. It features a non-toxic butyl rubber diap...
View full detailsThe Grundfos GT-H-80 PN16 G1 V is a steel pressure tank designed for drinking water applications, featuring a non-toxic butyl rubber diaphragm and...
View full detailsA Grundfos Pressure Tank holds a small store of pressurised water next to your pump, so the pump does not start every time a tap opens. Pumptastic sells the Grundfos GT-H steel tanks online, from 2 to 100 litres, in PN10 and PN16 ratings. Prices include GST, and standard shipping is free on orders over $100.
Ready to order? Pick a size below and add it to your cart. Not sure which tank suits your pump? Call (08) 6384 5884, Monday to Friday, 9am to 5pm, or contact our team and we will help you choose.
Inside the steel shell, a rubber diaphragm keeps the water and the air apart. The air is pre-charged at the factory, and it pushes water out when you open a tap. That gives you steady pressure and fewer pump starts, which is easier on the pump.
Short cycling is when a pump starts and stops again and again in a short time. It wears the motor and the pressure switch. A tank with the right pre-charge is the usual fix, although a leak or a faulty controller can cause it too.
The product pages list these tanks for drinking water, booster systems, irrigation, thermal expansion and as hydraulic hammer arrestors. The diaphragm is non-toxic butyl rubber, and the liner is moulded polypropylene.
We list seven sizes in the GT-H range: 2, 8, 18, 35, 60, 80 and 100 litres. Every tank has a 1 inch G connection. The main choices are the size and the rating, either PN10 or PN16. Each product name tells you both. In GT-H-80 PN10 G1, the 80 is the litres, PN10 is the pressure rating and G1 is the 1 inch connection. The long number at the end is the Grundfos product number.
Small tanks suit compact systems, hammer control and small thermal expansion jobs. The GT-H-18 PN10 is a common starting point for a small booster set. We also list the GT-H-8 and the GT-H-2, which has its own data, so read the product page for it.
Bigger tanks store more water, which gives longer rests between pump starts. The GT-H-60 PN10 and the GT-H-100 PN10 suit homes, farms and workshops with a busy supply. Size is not the same as usable water, because only part of the tank volume comes out between pump starts.
The number is the maximum operating pressure in bar. PN10 tanks handle up to 10 bar, and PN16 tanks handle up to 16 bar. Most homes only need PN10, and the PN10 tanks cost less than the PN16 versions of the same size. Choose PN16 when your pump can push the system above 10 bar, such as a high head pump. We list a GT-H-18 and the GT-H-80 PN16 in the higher rating.
Match the tank to the pump and the system, not just the price. Check these details before you order:
Tanks arrive pre-charged, but check the pre-charge on the product page, and check it again at install. A wrong pre-charge is one of the most common reasons a pump keeps cycling. Our pump pressure tank guide explains sizing and pre-charge for Western Australia.
A tank is one part of the system. If your pump still cycles after a new tank, look at the pump and controller too. A worn pump, a leaking pipe or a tired pressure switch can all cause the same symptoms, so it pays to check the whole set before you replace parts one by one. Browse our Grundfos pressure boosting pumps, the Grundfos pressure manager range and our full list of pressure tanks from other brands.
Trade readers can go deeper in our pressure tank trade guide, which covers pre-charge, sizing and fault finding.
Trade buyers can order online or ring for help. Buying several tanks for a project? Call (08) 6384 5884 and ask about pricing on larger orders. Heavy or oversized items may attract extra freight, which we confirm before dispatch.
Here is a tip you can pass on to your team. Write the tank size, rating and pre-charge on a label on the tank when you install it, and photograph it. When a pump starts cycling years later, anyone can check the numbers in a minute.
Standardise on one tank size across your sites where you can, so one spare fits many systems. Freight to a remote site takes longer than a trip to the shed, so order the spare with the pump.
For quotes, email the sizes and quantities to hello@pumptastic.com.au. We reply to emails within one business day, and calling is faster for urgent jobs.
We ship Australia wide with Australia Post, Toll and other couriers. Standard shipping is free over $100, and orders under $100 pay a flat $20 including GST. Allow around 5 to 7 business days to most places. Remote and rural areas, such as the Pilbara, Goldfields and Kimberley, can take a little longer.
Larger tanks are bulky, and goods over 25 kg need help to unload, so tell us if your site has no forklift. Need it faster? Express delivery is available by quote. We send tracking once your order ships. Read the full delivery and shipping terms.
If you want to buy Grundfos Pressure Tank sizes from an Australian shop, start on this page. Our Grundfos Pressure Tank shop online is open at any hour, with GST included in every price and free shipping over $100. Our team can check the size and rating by phone or email before you pay.
New tanks carry the manufacturer's warranty, and the length depends on the brand and model. Your rights under the Australian Consumer Law still apply. Checkout accepts Visa, Mastercard, American Express, UnionPay and Shop Pay.
We would rather size the tank with you than process a return, because returns cost you shipping and a restocking fee.
It is a steel tank with a rubber diaphragm that stores pressurised water next to a pump. It keeps pressure steady and cuts the number of pump starts.
Without a tank, a pump can start and stop every time you open a tap. A tank gives the pump longer rests and gives you steadier pressure.
We list 2, 8, 18, 35, 60, 80 and 100 litre GT-H tanks. The 18 and 80 litre sizes also come in the PN16 rating.
PN10 tanks are rated to 10 bar and PN16 tanks to 16 bar. Pick the rating above the highest pressure your system can reach.
The product pages describe the GT-H tanks as made for drinking water applications, with a non-toxic butyl rubber diaphragm. Check the product page for the tank you choose.
The pages list booster and irrigation systems, and thermal expansion. Most tanks list liquid temperatures up to 90 °C, but the GT-H-2 lists 70 °C, so check the page first.
Yes. Add a tank to your cart on this page. Prices are in Australian dollars and include GST.
Standard shipping is free over $100, and orders under $100 pay a flat $20 including GST. Allow around 5 to 7 business days to most places. Express is available by quote.
New tanks carry the manufacturer's warranty. Email us first to return one. Items must be new, unused and in original packaging, return shipping is on you, and approved refunds carry a 20 percent restocking fee.
Yes. Call (08) 6384 5884, Monday to Friday, 9am to 5pm, with the sizes and quantities, and we will quote the order.
Ready to buy? Add a Grundfos Pressure Tank to your cart, or call (08) 6384 5884 and we will check the size before you pay.
$100.00 away from free shipping!