News

In Western Australia’s Pilbara region, keeping a pit dry isn’t a nice-to-have it’s the line between a working face and a full stoppage. The operation in this case study, a mid-tier iron ore mine north of Perth, ran a bank of ageing cast-iron submersible bore pumps to manage groundwater inflow and feed its dewatering circuit. On paper the pumps were sized correctly. In practice, the highly mineralised, chloride-rich bore water common across the Pilbara was eating them alive.

If you run a bore in Western Australia, your water is quietly trying to destroy your pump. That isn't marketing fear it's groundwater chemistry. The single most expensive mistake operators make is choosing a mining bore pump on upfront price, watching it corrode, and replacing it twice before they admit the cheaper unit was never built for the water it was pumping.

Dig deep enough anywhere in Australia and you hit water. In the Pilbara, much of the highest-grade iron ore sits well below the natural water table, which means the moment excavation passes the phreatic surface, groundwater starts seeping into the...

When a bore pump fails 200 metres down a hole on a remote mine site, the cost isn't the pump it's the downtime. A stalled dewatering line or a dry camp can burn through thousands of dollars an hour. That's why choosing a mining bore pump is a procurement decision, not a hardware purchase. This guide walks Australian mine managers, site engineers, and procurement officers through pricing, lead times, installation, and aftercare so you buy once and buy right.

A mining bore pump sitting 120 metres down a bore in the Pilbara is the least convenient thing on a mine site to get wrong. Pull the wrong unit and you don't just lose the purchase price you lose the rig hire, the labour, the downtime, and the water your operation was relying on.

From the iron ore country of the Pilbara to the gold fields around Kalgoorlie and the coal seams of the Bowen Basin, every Australian mine site runs on water and fights to control it.

If you've landed here, you're past the "what is a mining bore pump" stage and you're choosing a brand. Good. The right pump on a continuous-duty Australian mine bore is the difference between a decade of clean dewatering and a six-month write-off. This 2026 comparison ranks the three brands.

You've drilled the bore. The geology is what it is. Now you're staring at two product categories that look almost identical on a spec sheet a standard submersible pump for around $1,500 and a mining-grade mining bore pump that starts north of $5,000.

Choosing the wrong Grundfos centrifugal pump is an expensive mistake undersize it and your shower trickles, oversize it and you've burned hundreds of dollars and watts you'll never recover. The good news: Grundfos uses a logical model system, and once you can read it, picking the right pump takes minutes. This guide decodes every major Grundfos range, gives you verified flow and pressure specs, and matches each model to a real Australian application all with live Pumptastic pricing.