Featured In
HydroSTART Submersible Level Controller (1PH 1 Pump 0.1-16A c/w ID) - FPC-82141
by Matelec
SKU
Original price
$1,609.52
-
Original price
$1,609.52
Original price
$1,609.52
$1,609.52
-
$1,609.52
Current price
$1,609.52
📢 For orders over $100, FREE Shipping Australia-wide
The HydroSTART Submersible Level Controller is designed for single pump applications, providing reliable level control, pump protection, and flexible control functionality. Featuring a capacitive touch interface, pump current sensing, and electronic protection, the HydroSTART is suitable for a wide range of submersible pumping applications.
Product Details
Enclosure
- Enclosure size: 400x300x200mm
- Powder coated mild steel enclosure with removable gland plate
- IP56 rated with inner door for outdoor mounting
- Enclosure size will increase for optional additions
Protection
- Selectable overload range: 0.1-6 Amp, 5-16 Amp
- Pad-lockable mains power isolator switch
- Low voltage control and input circuitry
- Individual pump circuit breaker protection/isolation
- Electronic short and overload protection
- Din rail mounted terminal connections
Control & Interface
- HydroSTART single pump capacitive touch keypad interface
- Indicator lights for system and pump status
- Buttons for alarm mute/reset and pump mode selection
- HydroSTART PCB control module with dipswitches for adjusting configuration
- Visual (strobe) and audible (buzzer) alarms
- Pump current sensing providing adjustable overload and other protections
Inputs
- Single phase (230Vac) power supply
- Up to 6x digital inputs for float or pressure switches, optional prime loss flow switch and system enable
- Standard terminal setup: Low level, duty stop, duty start, standby start, high level and system enable
Outputs
- 1x pump supply output
- BMS volt-free output for common fault
- Modbus RTU Serial RS485 connections for SCADA
Functions
- Level control mode for submersible pump applications
- Pressure control mode for pressure boosting applications
- Manual pump control
- System enable input
- Static duty mode
- Staggered pump start
- Smart chirp mode alarms
- Pump anti-seize protection
Fault Protection
- High level alarm
- Low level protection
- Low pressure protection
- Prime loss protection
- Pump current sensing with adjustable overload, undercurrent and zero current protection
Common Applications
- Sewage pump out
- Stormwater pump out
- Water transfer
- Pressure boosting
- Hot water recirculation
Documentation & Downloads
| Product Spec Sheet | Download |