HydroSTART 3PH 2 Pump 0.1-16A c/w ID & BMS - FPC-82243-BMS

The MATelec HydroSTART FPC-82243-BMS is a three-phase dual pump controller for controlling and protecting two pumps. It features a capacitive touch keypad interface, pump current sensing with adjustable electronic overload protection, an IP56 enclosure with inner door for outdoor mounting, and a BMS module providing additional volt-free outputs.

Product Details

Enclosure

• Enclosure size: 400x400x200mm
• Powder coated mild steel enclosure with removable gland plate
• IP56 rated with inner door for outdoor mounting
  
• Enclosure size will increase for optional additions
  

Protection

• Padlockable mains power isolator switch
• Low voltage control and input circuitry
• Individual pump circuit breaker protection and isolation
• Contactors for three-phase pump switching
• Pump current sensing providing adjustable overload, undercurrent and zero-current protection

Control & Interface

• Capacitive touch keypad interface with system, pump and input status indicators
• Alarm mute/reset and pump mode selection
• HydroSTART PCB control module with configuration DIP switches
• Visual strobe and audible buzzer alarms
• Duty sharing and pump alternation
• Staggered pump start
• Manual pump control
• Static duty mode
• Smart chirp alarm function

Inputs

• Three-phase 400Vac power supply
• Digital inputs for float or pressure switches
• System enable input
• Standard level control inputs for low level, duty stop, duty start, standby start and high level

Outputs

• 2 pump supply outputs
• BMS module providing volt-free outputs for power on, low and high level, individual pump run and fault, and common fault
• Modbus RTU Serial RS485 connections for SCADA

Documentation & Downloads