ASM DT38 Diaphragm Pump – 1½" (40NB) (0.75 kW, 415V Three Phase)
by ASM Pumps
SKU DT38
Original price
$3,168.16
-
Original price
$3,168.16
Original price
$3,168.16
$3,168.16
-
$3,168.16
Current price
$3,168.16
📢 For orders over $100, FREE Shipping Australia-wide
The ASM DT38 uses the same D38 pump end as the DS38 but is fitted with a 0.75 kW three-phase motor for higher power and continuous industrial operation. Its aluminium construction, nitrile diaphragms, and stainless steel valve seats ensure reliable performance for transfer, dewatering, oil skimming, oil/water separation, wastewater treatment, spill clean-up, and bilge pumping. Optional drives make it suitable for air or hydraulic motor applications.
Suitable Applications
- Transfer duties
- Dewatering
- Oil skimming
- Oil / water separation
- Wastewater treatment
- Spill clean-up
- Bilge pumping
Key Specifications
| SKU | DT38 |
| Pump Type | Mechanical diaphragm pump |
| Port Size | 1½" BSPF (40 NB) |
| Maximum Flow | 60 L/min |
| Maximum Suction Lift | 6 m |
| Maximum Discharge Head | 6 m |
| Maximum Solid Handling | 25 mm sphere |
| Pump Casing | Aluminium (Options: Cast Iron, Bronze, Stainless Steel) |
| Diaphragm | Nitrile (Options: Neoprene, EPDM, Viton, PTFE interface) |
| Valves | Nitrile flap valves with stainless steel seats (Options: EPDM, Viton, Polyurethane) |
| Motor Power | 0.75 kW |
| Voltage | 415 V, Three Phase |
| Ingress Protection | IP66 |
| Optional Drive Configurations | Increased safety motors (Ex e / Ex d), 12 V & 24 V DC, Air motor, Hydraulic motor |
Recommended Accessories
- Discharge Pulsation Dampener – PD1D
- Suction Pulsation Dampener – PD1S
- Fluid End Service Kit – D38K1
Documentation & Downloads
| Installation & Maintenance Manual | Download PDF |